Filter

UV Energy Meter Power Map II
The Power Map II UV Intensity Meter / Power Map II UV Energy Meter / UV meter is used to measure ultraviolet intensity and temperature, alongside radiation values (W/cm²) and energy density (J/cm²). It operates with the EIT 2.0 LLC UV PowerView® III software.

With four wavelength ranges (UVA, UVB, UVC, and UVV), the user-adjustable sampling rate (128-2048 Hz), large memory, and rechargeable battery, it is available in either high or low dynamic range.

This type of meter can measure and compare the UV intensity of multiple lamps in a system. The UV Power Map II is used with the PowerView III analysis software to analyze, store data, compare, etc.

SPECIFICATIONS DESCRIPTION
Dimensions 5.5” x 2.1” x 0.55” / 139.7mm x 53.34mm x 13.97mm (Thickness / Width / Height)
Materials Aluminum and stainless steel
Weight 207 grams
Case Supplied with a case, inner part made of polyurethane plastic, outer shell made of scratch-resistant nylon, USB cable, and USB drive with PowerView III software/user manual
Time-Out Period 2 minutes from standby mode (red LED blinking) with no buttons pressed
Battery and Battery Life Supplied with a charger in fast charge mode (+/- 90 minutes). Charging speed via USB port varies depending on the computer’s USB port. The battery life is 12,500 hours of continuous operation or over 100,000 measurement readings.
Memory Capacity Data collection time is 60 minutes
Sampling Rate User-adjustable from 128-2048 Hz (128-256-512-1024-2048)
Operating Temperature From 0 – 75ºC, high operating temperature (with warning when temperature exceeds the limit)
Thermocouple Supplied with a type J thermocouple, effective sampling rate is 32 Hz
Spectral Response UVA: 320-390nm, UVB: 280-320nm, UVC: 250-260nm, UVV: 395-445nm
Recommended Measurement Range High Range: UVA, UVB, UVV: 100mW/cm² to 10W/cm² / UVC – 10mW/cm² to 1W/cm²; Low Range: UVA, UVB, UVC, UVV: 1mW/cm² to 100mW/cm²
Measurement Range 10 W/cm² High Range, 100 mW/cm² Low Range
Accuracy +/- 10%; +/- 5% typical plus ±0.2% full scale, typical +/-5% or higher
Repeatability ± 2-5% typical; depends on source stability and device (conveyor), with the unit being better than 2.0%
PowerView III Software Programmed with National Instruments LabVIEW, designed for Windows 7-10. Data collected is stored in *.tdms files based on LabVIEW

 

Reviews

There are no reviews yet.

Be the first to review “UV Energy Meter Power Map II”