Tiếng Việt
Myanmar
Cambodian
korean
Chinese
| Features | CS-1 With Purge | CS-2 Without Purge | BTR (Behind the Reflective Panel) | DIN Rail Standard DRM-007 | DIN Rail EMI DIN DRM-006 |
| Dimensions | 0.57 x 1.10 x 0.75”(1.45 x 2.78 x 1.91 cm) | 0.57 x 0.60 x 0.75”(1.45 x 1.52 x 1.91 cm) | 0.55 x 0.55 x 1.55”(1.40 x 1.40 x 3.90 cm) | 3.56 x 3.11 x 0.98”(9.04 x 7.90 x 2.29 cm) | 3.56 x 3.11 x 0.98”(9.04 x 7.90 x 2.29 cm) |
| Weight | 0.8 oz (22.68 g) | 0.7 oz (19.86 g) | 1.0 oz (28.35 g) | 3.6 oz (101 g) | 3.6 oz (101 g) |
| Material | Aluminum Housing | Aluminum Housing | Aluminum Housing | DIN Rail Housing | DIN Rail Housing |
| Available Sensors | Standard, LED, or EMI | Standard, LED, or EMI | Only EMI | Used with standard or LED sensors | For use with EMI sensor only |
| UV Range/Power Supply | UVA/UVB/UVC or UVV L365/L385/L395 or L405 |
UVA/UVB/UVC or UVV L365/L385/L395 or L405 |
UVA/UVB/UVC or UVV | 20-28 Volts AC or DC 70 mA maximum | 20-28 Volts AC or DC 70 mA maximum |
| Operating Range (Temperature °C) | UVA, UVB, UVV:0-100°C
UVC & L-Bands: 0-70°C |
UVA, UVB, UVV:0-100°C
UVC & L-Bands: 0-70°C |
UVA, UVB, UVV:0-100°C UVC: 0-70°C | 0-50°C | 0-50°C |
| Aperture/Sensor Output | Available in multiple aperture sizes, specified at the time of ordering. The aperture size used depends on the lamp power and installation location. | 0-10 VDC or 4-20 milli-amps proportional to ultraviolet intensity | 0-10 VDC or 4-20 milli-amps proportional to ultraviolet intensity | ||
| Cable Type | Standard or LED sensor: 2 wires, Teflon protected, standard 10′ (3 m) EMI sensor: 3 twisted wires, Teflon protected, standard 10′ (3 m) |
At DIN: Two wires | Two wires + Grounded EMI sensor | ||
| Measurement Angle / Accuracy | Approximate measurement angle is 5° | Approximate measurement angle is 13° | Approximate measurement angle is 4° | +/- 3% full scale (10 Volts)
Alarm point +/- 5% from threshold setting |
+/- 3% toàn thang đo (10 Vôn), Điểm đặt cảnh báo
+/- 5% từ cài đặt ngưỡng |
Emi & Din Rail UV Sensor
The compact Emi & Din Rail UV sensor is available in UVA, UVB, UVC, or UVV and comes in enclosures such as CS-1, CS-2, or “BTR” (Behind the Reflector Plate). The internal aperture is based on the mounting position—contact EIT 2.0 LLC to discuss your application. The EMI DIN Rail (UV intensity monitor) provides a 0-10V or 4-20mA output signal proportional to the UV intensity.
Note: The compact EMI sensor must be grounded and used with EMI cable.
Reviews
There are no reviews yet.